6cf6c104ca6925c2eec1ad2d7da1f2048b61b1a0 chinhli Fri Jun 25 15:56:07 2010 -0700 Initial Git Instruction diff --git src/README src/README old mode 100644 new mode 100755 index a815d32..a2c5ad0 --- src/README +++ src/README @@ -1,325 +1,325 @@ CONTENTS AND COPYRIGHT This directory contains the entire source tree for Jim Kent and the UCSC Genome Bioinformatics Group's suite of biological analysis and web display programs. All files are copyrighted, but license is hereby granted for personal, academic, and non-profit use. A license is also granted for the contents of the top level lib directory for commercial users. Commercial users should contact kent@soe.ucsc.edu for access to other modules. Most users will only be interested in the inc and lib directories, which contain the interfaces and implementations to the library routines, and in a few specific applications. The applications are scattered in other directories. Many of them are web based. A few of them expect the MySQL database to be around. GENERAL INSTALL INSTRUCTIONS 1. Get the code. The best way to do this now for - Unix users is via CVS following the instructions at: - http://genome.ucsc.edu/admin/cvs.html + Unix users is via Git following the instructions at: + http://genome.ucsc.edu/admin/git.html Or, fetch the entire source in a single file: http://hgdownload.cse.ucsc.edu/admin/jksrc.zip Note futher documentation for the build process in your unpacked source tree in src/product/README.* Especially note README.building.source and the "Known problems" for typical situations you may encounter. 2. Check that the environment variable MACHTYPE exists on your system. It should exist on Unix/Linux. (And making this on non-Unix systems is beyond the scope of this README). The default MACHTYPE is often a long string: "i386-redhat-linux-gnu" which will not function correctly in this build environment. It needs to be something simple such as one of: i386 i686 sparc alpha x86_64 ppc etc ... with no other alpha characters such as: - To determine what your system reports itself as, try the uname options: 'uname -m' or 'uname -p' or 'uname -a' on your command line. If necessary set this environment variable. Do this under the bash shell as so: MACHTYPE=something export MACHTYPE or under tcsh as so: setenv MACHTYPE something and place this setting in your home directory .bashrc or .tcshrc environment files so it will be set properly the next time you login. Remember to "export" it as show here for the bash shell. 3. Make the directory ~/bin/$MACHTYPE which is where the (non-web) executables will go. Add this directory to your path. 4. Go to the jksrc/lib directory. If it doesn't already exist do a mkdir $MACHTYPE. 5. Type make. On Alphas there will be some warning messages about "crudeAli.c" otherwise it should compile cleanly. It's using gcc. 6. Go to jksrc/jkOwnLib and type make. 7. Go to the application you want to make and type make. (If you're not sure, as a simple test go to jksrc/utils/fixcr and type make, then 'rehash' if necessary so your shell can find the fixcr program in ~/bin/$(MACHTYPE). The fixcr program changes Microsoft style line terminations to Unix style terminations. Look at the "gotCr.c" file in the fixCr directory, and then do a "fixcr gotCr.c" on it. INSTALL INSTRUCTIONS FOR BLAT 1. Follow the general install instructions above. 2. If you're on an alpha system do a: setenv SOCKETLIB -lxnet on Solaris do setenv SOCKETLIB "-lsocket -lnsl" on SunOS do setenv SOCKETLIB "-lsocket -lnsl -lresolv" on Linux you can skip this step. 3. Execute make in each of the following directories: jksrc/gfServer jksrc/gfClient jksrc/blat jksrc/utils/faToNib INSTALL INSTRUCTIONS FOR CODE USING THE BROWSER DATABASE (and other code in the jkSrc/hg subdirectory) 1. Follow the general install instructions above. 2. Make the environment variable MYSQLINC point to where MySQL's include files are. (On my system they are at /usr/include/mysql.) While you're at it set the MYSQLLIBS variable to point to something like /usr/lib/mysql/libmysqlclient.a -lz When available, the commands: mysql_config --include and mysql_config --libs will display the required arguments for these environment settings. 3. Execute make in jksrc/hg/lib 4. Execute make in the directory containing the application you wish to build. 5. See also: http://genome.ucsc.edu/admin/jk-install.html and more documentation in this source tree about setting up a working browser in README files: jksrc/product/README.building.source - jksrc/product/README.cvs.access + jksrc/product/README.git.access jksrc/product/README.mysql.setup jksrc/product/README.install jksrc/product/README.trackDb jksrc/hg/makeDb/trackDb/README There are numerous README files in the source tree describing functions or modules in that area of the source tree. MAJOR MODULES Here is a list of some of the more useful modules in the library. Unless noted the module is a .h file in the inc directory and a .c file in the lib directory. o - common - String handling, singly-linked list handling. Other basic stuff every other module uses. o - hash - Simple but effective hash table routines. o - linefile - Line oriented file input, on some systems much faster than fgets(). o - cheapcgi - Parses out cgi variables for scripts called from web pages. o - htmshell - Helps generate HTML output for scripts that are called from web pages or just want to make web pages. o - memgfx - Creates a 256 color image in memory which can be drawn on, then saved as a .GIF file which can be encorperated into a web page. o - fuzzyFind - Align two pieces of DNA that are relatively similar (~80% base identity or better). Works best when one sequence is less than 30,000 bases and the other less than 100,000 bases. o - patSpace and supStitch - Align longer pieces of DNA. o - xensmall - Align two small pieces of dissimilar DNA. (7 State Pairwise HMM) o - xenbig - Align two large pieces of dissimilar DNA. o - jksql - Interface to mySQL that frees resources on exit and error conditions. o - dnautils and dnaseq - Simple utilities on DNA. o - fa - Read/write fasta format files. o - serv* and port* - Adapt the code to the peculiarities of various web servers. CODE CONVENTIONS INDENTATION AND SPACING: The code follows an indentation convention that is a bit unusual for C. Opening and closing braces are on a line by themselves and are indented at the same level as the block they enclose: if (someTest) { doSomething(); doSomethingElse(); } Tab stops are set to 8. Each block of code is indented by 4 from the previous block. (In the vi editor set ts=8 set sw=4.) Lines are no more than 100 characters wide. NAMES Symbol names begin with a lower-case letter. The second and subsequent words in a name begin with a capital letter to help visually separate the words. Abbreviation of words is strongly discouraged. Words of five letters and less should generally not be abbreviated. If a word is abbreviated in general it is abbreviated to the first three letters: tabSeparatedFile -> tabSepFile In some cases, for local variables abbreviating to a single letter for each word is ok: tabSeparatedFile -> tsf In rare, complex, cases you may treat the abbreviation itself as a word, and only the first letter is capitalized. genscanTabSeparatedFile -> genscanTsf Numbers are considered words. You would represent "chromosome 22 annotations" as "chromosome22Annotations" or "chr22Ann." Note the capitalized 'A" after the 22. These naming rules apply to variables, constants, functions, fields, and structures. They generally are used for file names, database tables, database columns, and C macros as well, though there is a bit less consistency there in the existing code base. ERROR HANDLING AND MEMORY ALLOCATION Another convention is that errors are reported at a fairly low level, and the programs simply print an error message and abort. If you need to catch errors underneath you see the file errAbort.h and install an "abort handler". Memory is generally allocated through "needMem" (which aborts on failure to allocate) and the macros "AllocVar" and "AllocArray". This memory is initially set to zero, and the programs very much depend on this fact. COMMENTING Every module should have a comment at the start of a file that explains concisely what the module does. Explanations of algorithms also belong at the top of the file in most cases. Comments should be of the /* */ form rather than the // form, which is not yet portable across all C compilers in all platforms. Structures should be commented following the pattern of this example: struct dyString /* Dynamically resizable string that you can do formatted * output to. */ { struct dyString *next; /* Next in list. */ char *string; /* Current buffer. */ int bufSize; /* Size of buffer. */ int stringSize; /* Size of string. */ }; That is there is a comment describing the overall purpose of the object between the struct name, and the opening brace, and there is a short comment by each field. In many cases these may not say much more than well-chosen field names, but that's ok. Almost any structure with more than three or four elements includes a "next" pointer as its first member, so that it can be part of a singly-linked list. There's a whole set of routines (see common.c and common.h) which work on singly-linked lists where the next field comes first. Their names all start with "sl." Functions which work on a structure by convention begin with the name of the structure, simulating an object-oriented coding style. In general these functions are all grouped in a file, in this case in dyString.c. Static functions in this file need not have the prefix, though they may. Functions have a comment between their prototype and the opening brace as in this example: char dyStringAppendC(struct dyString *ds, char c) /* Append char to end of string. */ { char *s; if (ds->stringSize >= ds->bufSize) dyStringExpandBuf(ds, ds->bufSize+256); s = ds->string + ds->stringSize++; *s++ = c; *s = 0; return c; } For short functions like this, the opening comment may be the only comment. Longer functions should be broken into logical 'paragraphs' with a comment at the start of each paragraph and blank lines between paragraphs as in this example: struct twoBit *twoBitFromDnaSeq(struct dnaSeq *seq, boolean doMask) /* Convert dnaSeq representation in memory to twoBit representation. * If doMask is true interpret lower-case letters as masked. */ { int ubyteSize = packedSize(seq->size); UBYTE *pt; struct twoBit *twoBit; DNA last4[4]; /* Holds few bases. */ DNA *dna; int i, end; /* Allocate structure and fill in name. */ AllocVar(twoBit); pt = AllocArray(twoBit->data, ubyteSize); twoBit->name = cloneString(seq->name); twoBit->size = seq->size; /* Convert to 4-bases per byte representation. */ dna = seq->dna; end = seq->size - 4; for (i=0; isize-i); *pt = packDna4(last4); /* Deal with blocks of N. */ twoBit->nBlockCount = countBlocksOfN(dna, seq->size); if (twoBit->nBlockCount > 0) { AllocArray(twoBit->nStarts, twoBit->nBlockCount); AllocArray(twoBit->nSizes, twoBit->nBlockCount); storeBlocksOfN(dna, seq->size, twoBit->nStarts, twoBit->nSizes); } /* Deal with masking */ if (doMask) { twoBit->maskBlockCount = countBlocksOfLower(dna, seq->size); if (twoBit->maskBlockCount > 0) { AllocArray(twoBit->maskStarts, twoBit->maskBlockCount); AllocArray(twoBit->maskSizes, twoBit->maskBlockCount); storeBlocksOfLower(dna, seq->size, twoBit->maskStarts, twoBit->maskSizes); } } return twoBit; } ==================================================================== This file last updated: $Date: 2010/06/03 16:48:53 $